Accessories
Industrial Arbors
Jetbroach Cutters
Jetbroach industrial cutters produce faster and better finished holes. Jetbroach Cutters cut holes up to 100mm (equivalent 4") wide and 75mm (equivalent 3") deep, three times faster than conventional twist drills.
Features
- The Spring-loaded pilot pin picks up the hole location quickly and ejects the slug automatically at the end of cut.
- Available with No. 2-4 Morse Taper and R-8 shanks.
- R-8 Shanks are available in side-lock and One-touch
COMBINATION ON HOLDERS AND CUTTERS
| Cutter Diameter | |||||
|---|---|---|---|---|---|
| Type | Part # | Description | DOC | ||
| BHM-02035 | TB00390-0 | MT-2 with 3/4" side-lock shank | 1-3/8" | ||
| BHM-03050 | TB00392-0 | MT-3 with 3/4" side-lock shank | 2" | ||
| BHM-13075 | TB00352-0 | MT-3 with 1-1/4" side-lock "Weldon" shank | 3" | ||
| BHM-14075 | TB00354-0 | MT-4 with 1-1/4" side-lock "Weldon" shank | 3" | ||
| BHR8-00050 | TB05891-0 | R8 with 3/4" side-lock shank | 2" | ||
Note:
- All 1-3/8" and 35mm depth cutters use Pilot Pin #UEA0835-0
- All 2" and 50mm depth cutters use Pilot Pin #UEA0850-0
- All Jetbroach cutters with a 1-1/4" Weldon shank use Pilot Pin #TA9A207-0